Pioneering Merit Badge Pamphlet Pioneering Merit Badge

Pioneering


Requirements were REVISED effective January 1, 2022.

New text is in bold GREEN underlined Serif text like this sentence.
Deleted portions are struck through RED italic text like this sentence.

To see the requirements, without the changes highlighted, Click here.

For the previous requirements, Click here.


  1. Do the following:
    1. Explain to your counselor the most likely hazards you might encounter while participating in pioneering activities and what you should do to anticipate, help prevent, mitigate, and respond to these hazards.
    2. Discuss the prevention of, and first-aid treatment for, injuries and conditions that could occur while working on pioneering projects, including rope splinters, rope burns, cuts, scratches, insect bites and stings, hypothermia, dehydration, heat exhaustion, heatstroke, sunburn, and falls.
  2. Do the following:
    1. Demonstrate the basic and West Country methods method method of whipping a rope. Fuse the ends of a rope.
    2. Demonstrate how to tie a rope tackle and the following knots: clove hitch formed as two half hitches, clove hitch on a bight, butterfly knot, roundturn with two half hitches, and rolling hitch, water knot, carrick bend, sheepshank, and sheet bend.
    3. Demonstrate and explain when to use the following lashings: square, diagonal, round, shear, tripod, and floor lashing.
  3. Explain why it is useful to be able to throw a rope, then demonstrate how to coil and throw a 40-foot length of 1/4- or 3/8-inch rope. Explain how to improve your throwing distance by adding weight to the end of your rope.
    Do the following:
    1. Using square and tripod lashings from requirement 2c, build a Tripod Wash Station (or with your counselor's permission, another camp gadget of your own design).
    2. Using rolling hitches or roundturns with two half hitches, and round lashings from requirements 2b and 2c, build a 15-foot Scout Stave Flagpole (or with your counselor's permission, another camp gadget of your own design).
    3. Using shear, square, and floor lashings, clove hitches on a bight, and rope tackles from requirements 2b and 2c, build a Simple Camp Table (or with your counselor's permission, another camp gadget of your own design.
  4. Explain the differences between synthetic ropes and natural fiber ropes. Discuss which types of rope are suitable for pioneering work and why. Include the following in your discussion: breaking strength, safe working loads, and the care and storage of rope.
  5. Explain the uses for the back splice, eye splice, and short splice. Using 1/4- or 3/8-inch three-stranded rope, demonstrate how to form View a demonstration on forming each splice.
  6. Using a rope-making device or machine, make a rope at least 6 feet long consisting of three strands, each having three yarns. Whip the ends.
  7. Explain the importance of effectively anchoring a pioneering project. Describe to your counselor the 1-1-1 3-2-1 anchoring and the log-and-stake anchoring methods system.
  8. With the approval of your counselor, demonstrate and use a rope tackle. Be sure the rope tackle is secured properly. Explain the advantages and limitations of using a rope tackle. Describe the potential damage that friction can do to a rope.
    Describe the lashings that are used when building a trestle, how the poles are positioned, and how X braces contribute to the overall structural integrity of a pioneering project.
  • All pioneering projects constructed for this merit badge must comply with height standards as outlined in the Guide to Safe Scouting.
  1. By yourself, build a trestle using square and diagonal lashings. Explain why trestles are used when constructing pioneering projects.
    Working in a group, (or individually with the help of your counselor) build a full size pioneering structure, using one of the following designs in the merit badge pamphlet.
    • Double A-Frame Monkey Bridge
    • Single A-Frame Bridge
    • Single Trestle Bridge
    • Single Lock Bridge
    • 4x4 Square Climbing Tower
    • Four Flag Gateway Tower
    • Double Tripod Chippewa Kitchen
    • Another type of structure approved in advance by your counselor
    Carefully plan the project, assembling and organizing all the materials, referring to the points under Safe Pioneering, and complying with the height restrictions in the Guide to Safe Scouting.
  2. With the approval of your counselor and using appropriate lashings and pioneering techniques, build and use one full-size pioneering project from either group A or group B. Your project must comply with the requirements of the Guide to Safe Scouting. (Requirement 10 may be done at summer camp, at district or council events, or on a troop camp outing.)
    • Group A: Tower OR bridge
      • Anchor your project as appropriate and necessary. Explain how your anchoring system works. Group A projects may be worked on in a group and with others.
    • Group B: Camp chair OR camp table
      • Group B projects must be worked on individually.00000000

BSA Advancement ID#: 84
Scoutbook ID#: 77
Requirements last updated in: 2022
Pamphlet Publication Number: 35931
Pamphlet Stock (SKU) Number: 655712
Pamphlet Revision Date: 2022

 
Worksheets for use in working on these requirements: Format
Word Format PDF Format
 

Blanks in this worksheets table appear when we do not have a worksheet for the badge that includes these requirements.


Page updated on: May 08, 2022



Scouts Using the Internet Cartoon - Courtesy of Richard Diesslin - Click to See More Cartoons
© 1994-2024 - U.S. Scouting Service Project | Site Map | Disclaimer | Project Team | Contact Us | Privacy Policy

Materials found at U. S. Scouting Service Project, Inc. Websites may be reproduced and used locally by Scouting volunteers for training purposes consistent with the programs of the Boy Scouts of America (BSA), the World Organization of the Scout Movement (WOSM) or other Scouting and Guiding Organizations. No material found here may be used or reproduced for electronic redistribution or for commercial or other non-Scouting purposes without the express permission of the U. S. Scouting Service Project, Inc. (USSSP) or other copyright holders. USSSP is not affiliated with BSA or WOSM and does not speak on behalf of BSA or WOSM. Opinions expressed on these web pages are those of the web authors. You can support this website with in two ways: Visit Our Trading Post at www.ScoutingBooks.com or make a donation by clicking the button below.
(U.S. Scouting Service Project Donation)


(Ruth Lyons Memorial Donations)